Power output (CPC):
> pentode: 1 ÷ 40W
> triode: 0.5 ÷ 15W

Preamp tubes: 2 x ECC83

Power tubes: 2 x EL34, 1 x ECC83

Channels: two

Controls:
> Gain
> Master
> Presence
> Bright
> Solo
> Continuous Power Control (CPC)

EQ controls: Low – Mid – High (passive)

Speaker outputs:
> One 4 ohm
> One 8 ohm
> One 16 ohm

Other features:
> Input 1 (Hi Z: 1 MΩ)
> Input 2 (Low Z: -6 dB)
> Bias (low/high switch)
> Service ATCS interface (optional)
> Accutronics® spring reverb

Speaker size: 2x12” B&C neodymium (custom for DV Mark)

Speaker power handling: 300W (AES standard) – impedance: 8 ohms; can also be connected to an external 8 ohm cabinet*

Size (mm): 684 (w) x 465 (h) x 272 (d)
Size (inch): 26.93” (w) x 18.31” (h) x 10.71” (d)
Weight: 17.00 kg / 37.48 lbs

*As of June, 2011, the impedance of this combo is 8 ohms.

To check the impedance of your combo, please check the technical information included on the label on the rear side of your combo.

NOTE: 
DV Mark amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.

Product specifications are subject to change without notice  
The DV40 212 (2x12”) is a two-channel, 40W all-tube combo, equipped with EL34 power tubes. Get great clean tone on channel 1 and rich tube saturation from channel 2.

Tonal options are almost endless thanks to DV Mark’s patent pending Continuous Power Control (CPC), which allows you to change the power incrementally from the full 40W (class A/B) gradually all the way down to 1W (class A) in pentode mode; or 15W (class A/B) to 0.5W (class A) in triode mode.

Plug into this combo and you’ll immediately hear its quality: very clean sounds even at high volumes, great crunchy rhythm tone, rich saturation, boost switch for lead playing, balanced response in all frequency ranges and impressive bass response!

The range of tonal options is incredible, and it’s easy to find your own sound quickly using EQ and the very practical CPC feature.

The DV 40 212 automatically biases and matches the output tubes and thanks to the Service port can be connected to the optional DVM Controller interface, which displays many internal amp parameters such as voltages and tube life to help you maintain the amp to its full potential.
 
----------------------------------------------------------------------------------------------
Sound clips

Clip 1: Fender Strat, neck and middle pickups CPC 9:00, channel 1, Solo off, Bright on, Reverb 9:00 Clip 2: Fender Strat, middle pickup, Channel 1, CPC 12:00, Solo on, Bright off, Reverb 9:00 Clip 3: Fender Strat, neck pickup, Channel 2, CPC 5:00, Solo on, Reverb 12:00 Clip 4: Gibson Les Paul, neck pickup, channel 1, Bright on, CPC 10:00, Reverb 10:00, Solo on Clip 5: Gibson Les Paul, bridge pickup, channel 2, Solo off, Reverb 8:00, CPC 7:00 Clip 6: Gibson Les Paul, both pickups, channel 2, Solo on, Reverb 3:00, CPC 4:00 ----------------------------------------------------------------------------------------------

Photos
Download
User_Manual__DV_112__DV_212.pdf (Size: 2816.1 kb)